To stay up to date you can also follow on Mastodon.

🔗 Electrical engineering

The sulfur lamp (also sulphur lamp) is a highly efficient full-spectrum electrodeless lighting system whose light is generated by sulfur plasma that has been excited by microwave radiation. They are a particular type of plasma lamp, and one of the most modern. The technology was developed in the early 1990s, but, although it appeared initially to be very promising, sulfur lighting was a commercial failure by the late 1990s. Since 2005, lamps are again being manufactured for commercial use.

🔗 Internet culture

Community Memory (CM) was the first public computerized bulletin board system. Established in 1973 in Berkeley, California, it used an SDS 940 timesharing system in San Francisco connected via a 110 baud link to a teleprinter at a record store in Berkeley to let users enter and retrieve messages. Individuals could place messages in the computer and then look through the memory for a specific notice.

While initially conceived as an information and resource sharing network linking a variety of counter-cultural economic, educational, and social organizations with each other and the public, Community Memory was soon generalized to be an information flea market, by providing unmediated, two-way access to message databases through public computer terminals. Once the system became available, the users demonstrated that it was a general communications medium that could be used for art, literature, journalism, commerce, and social chatter.

🔗 Environment

An automated vacuum waste collection system, also known as pneumatic refuse collection, or automated vacuum collection (AVAC), transports waste at high speed through underground pneumatic tubes to a collection station where it is compacted and sealed in containers. When the container is full, it is transported away and emptied. The system helps facilitate separation and recycling of waste.

The process begins with the deposit of trash into intake hatches, called portholes, which may be specialized for waste, recycling, or compost. Portholes are located in public areas and on private property where the owner has opted in. The waste is then pulled through an underground pipeline by air pressure difference created by large industrial fans, in response to porthole sensors that indicate when the trash needs to be emptied and help ensure that only one kind of waste material is travelling through the pipe at a time. The pipelines converge on a central processing facility that uses automated software to direct the waste to the proper container, from there to be trucked to its final location, such as a landfill or composting plant.

🔗 Philosophy 🔗 Psychology

The illusory truth effect (also known as the validity effect, truth effect, or the reiteration effect) is the tendency to believe false information to be correct after repeated exposure. This phenomenon was first identified in a 1977 study at Villanova University and Temple University. When truth is assessed, people rely on whether the information is in line with their understanding or if it feels familiar. The first condition is logical, as people compare new information with what they already know to be true. Repetition makes statements easier to process relative to new, unrepeated statements, leading people to believe that the repeated conclusion is more truthful. The illusory truth effect has also been linked to "hindsight bias", in which the recollection of confidence is skewed after the truth has been received.

In a 2015 study, researchers discovered that familiarity can overpower rationality and that repetitively hearing that a certain fact is wrong can affect the hearer's beliefs. Researchers attributed the illusory truth effect's impact on participants who knew the correct answer to begin with, but were persuaded to believe otherwise through the repetition of a falsehood, to "processing fluency".

The illusory truth effect plays a significant role in such fields as election campaigns, advertising, news media, and political propaganda.

🔗 Computer science

The man or boy test was proposed by computer scientist Donald Knuth as a means of evaluating implementations of the ALGOL 60 programming language. The aim of the test was to distinguish compilers that correctly implemented "recursion and non-local references" from those that did not.

There are quite a few ALGOL60 translators in existence which have been designed to handle recursion and non-local references properly, and I thought perhaps a little test-program may be of value. Hence I have written the following simple routine, which may separate the man-compilers from the boy-compilers.

🔗 Film 🔗 France 🔗 France/Paris 🔗 Film/French cinema

100 Years is an upcoming science fiction film written by John Malkovich and directed by Robert Rodriguez. Advertised in 2015 with the tagline "The Movie You Will Never See", it is due to be released on November 18, 2115. The 100 year span matches the time it takes for a bottle of Louis XIII Cognac to be properly aged before its release to consumers. The film stars an international ensemble, with American actor John Malkovich, Taiwanese actress Shuya Chang, and Chilean actor Marko Zaror.

100 Years will apparently be a short film, Rodriguez having stated in a 2019 interview with French YouTuber InThePanda: "I was making several short films for them, and I finished that one first, we shot that one first, I thought that was gonna be a commercial or something. And then I showed them the movie and they said 'Yeah, that's great, that's great. That's the one we lock away.' And I said 'What? That's the one you lock away? What about the other one with the future--' 'No, that's the commercial.' [...] The one that I was most attached to was the one they locked away."

🔗 Philosophy 🔗 Philosophy/Contemporary philosophy 🔗 Philosophy/Ethics

Master–slave morality (German: Herren- und Sklavenmoral) is a central theme of Friedrich Nietzsche's works, particularly in the first essay of his book, On the Genealogy of Morality. Nietzsche argued that there were two fundamental types of morality: "master morality" and "slave morality". Master morality values pride and power, while slave morality values kindness, empathy, and sympathy. Master morality judges actions as good or bad (e.g. the classical virtues of the noble man versus the vices of the rabble), unlike slave morality, which judges by a scale of good or evil intentions (e. g. Christian virtues and vices, Kantian deontology).

For Nietzsche, a morality is inseparable from the culture which values it, meaning that each culture's language, codes, practices, narratives, and institutions are informed by the struggle between these two moral structures.

🔗 Telecommunications

The Wheatstone system was an automated telegraph system that replaced a human operator with machines capable of sending and recording Morse code at a consistent fast rate. The system included a perforator, which prepared punched paper tape called a Wheatstone slip, a transmitter that read the tape and converted the symbols into dots and dashes encoded as mark and space electric currents on the telegraph line, and a receiver at the other end of the telegraph line that printed the Morse symbols. The system was invented by Charles Wheatstone. Enhancements could be made so that it was a duplex system, able to send and receive on the same line simultaneously.

The Wheatstone slip was a paper tape that contained holes in a pattern to control the mark and space signals on the telegraph line. The paper tape was from 0.46 to 0.48 inches in width, (but the standard width is from 0.472 to 0.475 inches) and a standard thickness of 0.004 to 0.0045 inches. Olive oil coating lubricated the punch process. There were three rows of holes. The middle row forms a rack so that a star wheel can move the paper forward. Every used position on the tape has a middle hole punched. The top hole indicates when to turn on the mark signal on the line, and the bottom hole says to turn off the mark signal. Each vertical column represents a time interval in the Morse code, including the spacing between the holes. The holes are spaced 0.1 inches apart. A column of three holes turns on the mark at the beginning of the interval, and turns it off at the end making a dot. If there is a top hole without a bottom, and then the next column has a bottom without a top hole, mark is on for three intervals, and a dash is represented. If there is only a centre hole, then nothing changes, and this would normally be used to put in space between letters and words.

The Wheatstone perforator was a manually operated hole punch machine to produce Wheatstone slips. It had three buttons (or keys) labelled "A", "A1" and "A2". "A" punched the pattern for dot, "A1" punched the pattern for space, and "A2" punched the dash pattern in two columns. The keys were so difficult to press that fist-held rubber-tipped mallets were used to depress them and operate the punches. Using this, invalid combinations of holes could not be produced. The blank paper tape was fed in from the right over a roller and came out the left side. It was oriented in a vertical plane. The paper punches were labelled with numbers: 1 for the top hole of the dot, 2 for the sprocket hole for dot, and 3 for the bottom hole for dot. When a dash was punched, extra hole punches to the right punched a centre hole with number 4 and a bottom hole with number 5. The perforator was introduced in 1867. It enabled transmission speeds on a telegraph line to increase to 70 words per minute. The very first message ever punched onto a tape was "SOS EIOS". The manual perforator was subsequently replaced by keyboard perforators like the Gell keyboard perforator or Kleinschmidt keyboard perforator.

Each of the keys had a spring to restore its position after pressing. Each key moved a corresponding lever underneath the instrument. The other end of the levers protruded up into the back of the mechanism. Each punch rod also had a spring to put it back in place after punching a hole. For space and dot keying (A or A1) the star wheel was only allowed to turn one position by a pawl, and the paper tape only moved forward one position. However, when key A2 was hit, the corresponding lever B2 raised a bar (h) which allowed another lever attached to the pawl to move further back when the star wheel rotated, and the wheel could turn two positions, for a dash. The distance the paper tape moved for each position was determined by how far lever k moved, and its range of movement had to be set by adjusting screws i and t. A flat spring g stored energy from the punch to move the paper. The force of the spring was determined by adjusting screws n and n'. A guide roller (r) with a groove was pressed by an adjustable spring to press the pawl against the star wheel. The star wheel was on a frame with a piece sticking out the left hand side as a lever. When the operator wanted to insert paper tape, this lever was pulled, and the star wheel retracted from the paper.

The Wheatstone transmitter read a paper tape (Wheatstone slip) and converted the dot pattern into mark and space symbols on the telegraph line. It worked by two rods alternately rising up to sample the holes in the tape. First of all the top hole was probed, and if the rod could go through, it moved a compound lever that connected the mark signal to the line. With no hole the lever remained unmoved. Next the top hole rod dropped and the bottom hole rod checked whether there was a bottom hole in the tape. If there was, the compound lever was moved back to connect the space signal on the line. If there was no hole, the compound lever was left alone as it was. An extra switch enabled the transmitter to be bypassed so that a Morse key could be used instead.

The Wheatstone receiver converted the signal on the telegraph line to an inked pattern on a paper strip. An electromagnet electrically connected to the telegraph line moved an inking wheel to press against the paper. A clockwork mechanism advanced the paper tape, and turned the inking wheel, and an ink supply wheel. The paper advance speed could be adjusted between 7 and 60 feet per minute. Power to the clockwork had three sources: it could be a coiled spring, a weight, or an electric motor. Paper spools were stored in drawers beneath the reader to allow quick change when one was exhausted. The ink supply wheel turned in an inkwell. The machine was started and stopped by use of a lever. In electrical characteristics, the electromagnet had two windings, each of 100 ohms resistance. These could be connected in parallel or series to achieve a 50 or 200 ohm resistance, to better match the telegraph line. Other maintenance that might have been required was cleaning of the marker and supply wheels, adjusting the armature-coil spacing to avoid a marking or spacing bias, and cleaning the sounding tongue and contact points.

The Wheatstone telegram consisted of strips of paper tape with the Morse code printed on it, pasted on a form. The telegram would later be retyped to make a final presentable message for the recipient.

🔗 Computing 🔗 Computer science 🔗 Science Fiction 🔗 Cognitive science 🔗 Robotics 🔗 Transhumanism 🔗 Software 🔗 Software/Computing 🔗 Futures studies

Artificial general intelligence (AGI) is the hypothetical intelligence of a machine that has the capacity to understand or learn any intellectual task that a human being can. It is a primary goal of some artificial intelligence research and a common topic in science fiction and futures studies. AGI can also be referred to as strong AI, full AI, or general intelligent action. (Some academic sources reserve the term "strong AI" for machines that can experience consciousness.)

Some authorities emphasize a distinction between strong AI and applied AI (also called narrow AI or weak AI): the use of software to study or accomplish specific problem solving or reasoning tasks. Weak AI, in contrast to strong AI, does not attempt to perform the full range of human cognitive abilities.

As of 2017, over forty organizations were doing research on AGI.

🔗 Germany 🔗 Motorcycling

The Daimler Petroleum Reitwagen ("riding car") or Einspur ("single track") was a motor vehicle made by Gottlieb Daimler and Wilhelm Maybach in 1885. It is widely recognized as the first motorcycle. Daimler is often called "the father of the motorcycle" for this invention. Even when the three steam powered two wheelers that preceded the Reitwagen, the Michaux-Perreaux and Roper of 1867–1869, and the 1884 Copeland, are considered motorcycles, it remains nonetheless the first petrol internal combustion motorcycle, and the forerunner of all vehicles, land, sea and air, that use its overwhelmingly popular engine type.